Foscam FI9818W User Manual page 10

2. Enable UPnP and DDNS in the camera's settings page. We recommend you to use the DDNS by
factory default.
3. You can see the port of your camera here. If you want to set Remote Access for several cameras on
the same network, you will need to change the HTTPS port for each camera.
4. If the UPnP of the router has been enable, you do not need to perform following steps.
you need to select one of the following methods to configure port forwarding on your router. For these
steps, we will be using the TP-LINK brand wireless router as an example.
 If there is a UPnP function in your router：
Choose "Forwarding > UPnP", make sure that the Current UPnP Status is Enabled.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Select Yes and click Save.
Click Enable DDNS and click Save.
The content in the Manufacture's DDNS
column is the domain name of your camera.
Otherwise,
8