Physical Description - TP-Link M7300 User Manual

1.3 Physical Description

The details about the Exterior are explained as below.

LED indicators:
Item

Note:
The LEDs will turn off automatically after 15 seconds. Please press the Power button to turn
them on again.

Power Button: When the Device is successfully installed, press and hold this button until
all the LEDs are lit. You can also press and hold this button to turn off the M7300.
 Micro USB Input: It's for you to connect the Device with the power adapter (attached in the
package) via the USB cable.
 Reset Button (hole): It's the button to restore the Device to its factory defaults. With the
M7300
Status Indication
On The Wi-Fi is enable.
On The M7300 is connected to the Internet.
On The M7300 is on.
Red The battery level is less than 10%.
Blinking Green The M7300 is charging.
LTE-Advanced Mobile Wi-Fi User Guide
-3-