Account Management - TP-Link M7300 User Manual

Click Restore to reset all configuration settings to their default values. All of the settings you
have saved will be lost when the default settings are restored.
You can restore the following factory default values:

Default Password: admin

Default IP Address: 192.168.0.1

Default Subnet Mask: 255.255.255.0

3.4.7.3. Account Management

You can change your login password on this page.

Old Password: The old password that is used to log in to the device.

New Password: The new password you are going to set to log in to the device.

Confirm Password: Enter the new password again for confirmation.

Note:
If you can't access the SD card via Wi-Fi after changing the login user password, please log out
or reboot your computer and then try again.
Click Save to save your settings.
M7300
Figure 3-26 Account Management
-30-
LTE-Advanced Mobile Wi-Fi User Guide