TP-Link TL-WR710N Quick Installation Manual

Quick Installation Guide

150Mbps Wireless N Mini Pocket Router
TL-WR710N
MODEL NO.

Hardware Connection

Wireless Router Mode (Default)
1 2
As a wireless router, TL-WR710N create an
instant private wireless network and share
Internet to multiple Wi-Fi devices.
The LAN devices share the same IP from ISP
through Wireless or Wired port. While
connecting to Internet, the LAN/WAN
Ethernet port works as a WAN port at
Wireless Router mode. It's suitable for most
hotel and home network with Plug-N-Play
after finishing Instant Wireless Connection.
Wired Network
Cable
Protected by
NAT Firewall
Instant Wireless Connection
For Windows 7
Go to Start > Control Panel > View network
1 2
status and tasks > Change adapter settings.
Right click Wireless Network Connection,
and select Properties. Double click Internet
Protocol Version 4 (TCP/IPv4) in the item list.
For Windows 8
Go to Metro interface> Control Panel > View
2
1
network status and tasks > Change adapter
settings. Right click Wireless Network
Connection, and select Properties. Double
click Internet Protocol Version 4 (TCP/IPv4) in
the item list.
For Mac OS
Click the icon at the right top of your
2
1
desktop. Then click Open Network
Preferences.... The screen will appear as
shown below. Choose AirPort and click
Advanced....
1. The default SSID of the network is TP-LINK_xxxxxx (The TP-LINK_xxxxxx is the SSID on the label. )
2. The pre-encryption function is enabled by default and the default Network key/Security key is the Password on the
label. The password is case-sensitive.

Package Contents

Note: The provided power plug may differ from the picture due
to different regional power specifications. Here we take
the EU version as an example.
TL-WR710N Ethernet Cable
150Mbps Wireless N Mini Pocket Router
MODEL NO.
Resource CD QIG
Access Point Mode 3
As the supplement of wired LAN, TL-WR710N
enables the wired LAN to connect to the
Internet wirelessly.
In this mode, this device can be connected to a
wired network and transform the wired access
into wireless that multiple devices can share
together, especially for a home, office or hotel
where only wired network is available.
Wired Network
Cable
(This method is for connecting to the default Wireless Router Mode. If you want to configure Wireless Router Mode or choose other modes, please skip to Router Configuration.)
Set up the TCP/IP Protocol in "Obtain an IP
3
address automatically" mode on your PC. Click
OK.
Set up the TCP/IP Protocol in "Obtain an IP
3
address automatically" mode on your PC.
Click OK.
3
Set the Configure IPv4 as "Using DHCP". Click
OK.

Physical Description

Connect the plug directly to the TL-WR710N to finish
hardware connection.
After hardware connection, please write down the
Wireless Password and SSID on the label of your
Router for later use. Both are case-sensitive.
Model:TL-WR710N(EU)
S/N:XXXXXXXXXXXX
MAC:B0487A663D6C
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
Model:TL-WR710N(EU) Ver:1.0
S/N:XXXXXXXXXXXX
MAC:B0487A663D6C
Wireless Password/PIN:12345678
TL-WR710N FCC ID: TE7WR710N SSID:TP-LINK_663D6C
IC: 8853A-WR710N
Wireless Password/PIN: Pre-encryption password of
*
TL-WR710N.
*
SSID: Wireless Network Name of TL-WR710N.
4 Client Mode
Repeater Mode
TL-WR710N is used as a wireless network
TL-WR710N is used to extend the range of
card to connect the wireless network signal
wireless signal of the existing AP or wireless
or wireless router.
router.
In this mode, this device can be connected to
In this mode, this device can copy and
another device via Ethernet port and act as
reinforce the existing wireless signal to
an adapter to grant your wired devices
extend the coverage, especially for a large
access to a wireless network, especially for a
space to eliminate signal-blind corners.
Smart TV, Media Player, or game console only
with an Ethernet port.
Click the icon at the bottom of your desktop. Enter the Security key. Click OK.
4
Click refresh button, and then select the target
network. Click Connect.
Click the icon at the bottom of your screen, The screen will appear as shown below. Enter
4
and a network list will appear at the right side of the network security key, and then click Next.
your screen. Select your target network, and
then click Connect.
Click the icon at the right top of your The screen will appear as shown below. Enter
4
desktop. Click refresh button, and then select the Password, and then click OK.
the target network.
TL-WR710N LED:
Status
The device is working properly.
Solid Blue
Condition 1: System is booting.
Blinking Condition 2: The Ethernet Cable or USB Device
is connecting to the product.
USB Reset LAN/WAN LAN
USB It is used to connect USB Flash or Hard Disk for file sharing and
Mobile devices for charging.
Reset It is used to reset the Router to its factory defaults.
Ver:1.0
LAN/WAN : This port works as LAN in Access Point/Repeater/
Client/WISP Client Router mode and as WAN in Wireless Router
mode.
LAN
: This port works as LAN in Wireless Router/Access
Point/Repeater/Client/WISP Client Router mode .
For more detailed information about Reset, please refer to
Appendix: Troubleshooting.
5 WISP Client Router Mode
In WISP mode, TL-WR710N enables multiple
users to share Internet connection from WISP.
In this mode, the device enables multiple
users to share Internet connection from
WISP. The LAN port devices share the same IP
from WISP through Wireless port.
When you can see Connected as shown in the
5
following
connected to the wireless network.
When Connected appears behind the SSID,
5
you have successfully connected to the target
network.
When appears before the SSID, you have
5
successfully connected to the target network.
Indication
SSID: def
screen, you've successfully