TP-Link M7200 Quick Installation Manual

Quick Installation Guide
Mobile Wi-Fi
* Images are for demonstration only.
Screen Display
Home Screen Menu Screen
Press to enter the menu screen.
Press to switch between icons.
560
MB
5.0
M/S
Carrier Name
Press to turn on or off the screen display.
Press to select an icon.
The screen display will automatically turn off after being idle for a while.
!
To turn it on again, press the
or MENU button.
1. Install the SIM Card and Battery
a. Remove the back cover.
2. Connect to the Internet
a. Power on the Mobile Wi-Fi.
Press and hold the Power button
welcome screen appears.
Device Info
! · If you cannot access the internet, refer to FAQ > Q1.
· By default, Power Saving is enabled and the Mobile Wi-Fi will turn off Wi-Fi when no wireless devices are connected to it for 10 minutes.
To resume the Wi-Fi connection, press the
b. Install your SIM card.
SIM card requirement:
!
+ +
Standard Micro SIM card +
SIM card Provided Micro SIM card adapter + Provided sticker Provided Nano SIM card adapter + Provided sticker
b. Connect your smart device to the Mobile Wi-Fi.
To view the SSID and password, press the MENU button to switch to the
until the
Device Info icon, then press the Power button
Device Info
SSID: TP-Link_XXXX
Password: XXXXXXXX
Login Address:
http://tplinkmifi.net
or MENU button.
c. Install the provided battery. d. Replace the back cover.
If you have a micro
!
SD card, you can
insert it into the SD
+ +
card slot for storage
Nano SIM card +
and media sharing.
Enjoy the internet!
to enter the screen.
< Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Other...