Specifications - Phonic PHA4800 User Manual

SPECIFICATIONS

Audio Inputs
Main In
Input Impedance
Sensitivity
Max. Input Level
CMRR
AUX In
Input Impedance
Sensitivity
Max. Input Level
Direct In
Input Impedance
Sensitivity
Max. Input Level
Audio Outputs
Main Output
Phones Output
Power Amplifier
Max. Main Output Power
Max. Phone Output Power
Min. Output load impedance
System Specifications
Frequency response
Noise
Dynamic range
THD
Function Control
Input level
Balance per channel
Out level per channel
Treble cutoff frequancy
Bass cutoff frequancy
Function Swtiches
Stereo/2-Channel
Left mute
Right mute
Display
Input Level
Output level
Power Supply
Mains voltage
Power consumption
6
HF-filtered, servo-balanced XLR and 1/4" TRS connectors
0k ohm balanced, 40k ohm unbalanced
+16 dBu at +4dBi nominal level, +1 dBV at -10 dBV nominal level
typically 40dB, >55 dB@1kHz
1/4"TRS connector (stereo)
1/4"TRS connector (stereo)
XLR and 1/4"TRS connectors, balanced
1/4"TRS connector (stereo)
+22 dBm (load impedance 8 ohm)
+19 dBm (load impedance 100 ohm)
+7 dBm (load impedance 8 ohm)
22Hz to 22kHz>90dB@0dBu
0.006% typ.@+4dBu, 1 kHz, gain1
mix between Aux and Main signals/balance between right and left channel
swtiches between stereo mode and 2-ch mode
mutes the left signal of the respecitve channel
mutes the right singal of the respective channel
4-digit LED-Display: -30/-10/0 dB/clip
4-digit LED-Display: -30/-10/0 dB/clip
USA/Canada 120V~, 60Hz
Europe/U.K/Australia 230~, 50Hz
gerenal export model 120/230 V~, 0-60Hz
-34dB
5k ohm
-20dB
+22 dBu
15k ohm
-28dB
+22 dBu
8 ohm
10Hz to 150kHz, +/-3dB
22Hz to 22kHz:110 dB
Variable
Variable
12 kHz; range +/- 12 dB
80 Hz; range +/- 12 dB
Japan 100V~, 50-60Hz
34W
PHA4800