Specifications - Phonic MK15 User Manual

SPECIFICATIONS

MK15
Maximum Input Signal Level Accepted
load - 120 VAC line
Tone Control Range
Speaker Size and Rating
Input Power Requirements
Cabinet Size and Weight
MK50
Output Power Rating
Gain
Tone Control Range
Input Impedance
Maximum Signal Accepted
Insert Jack
Speaker Size and Rating
Cabinet Type
Input Power Requirements
Cabinet Size and Weight
6
15 volts peak to peak
Low: 15dB @ 50Hz
Lo Mid: 15dB @ 150Hz
Hi Mid: 13dB @ 1kHz
High: 27dB @ 10kHz
custom design 8"
Power handling, 15 Watts
120 VAc, 60Hz, 30VA
100/110 VAc, 50/60Hz, 30VA
230 VAc, 50/60Hz, 30VA
14" H x 15" W x 12-1/2" d, 19 lbs
50 watts RMS @ 2% THd, 8 ohm load – 120 VAc line
50dB, tones at 12:00 @ 1kHz
Low: 18dB @ 50Hz
Lo Mid: 21dB @ 150Hz
Hi Mid: 16dB @ 1kHz
High: 29dB @ 10kHz
10k ohms
10 volts peak to peak
Line output (Max): 2.5 volts peak to peak
Line Input (Max): 2.5 volts peak to peak
custom design 12" w/ 1.5" voice coil,
30 oz. magnet; power handling 100 watts
Piezo Tweeter; power handling 150 watts
Port Tuned enclosure
120 VAc, 60Hz, 85VA
100/110 VAc, 50/60Hz, 85VA
230 VAc, 50/60Hz, 85VA
21.5" H x 17.5" W x 15" d, 39.5 lbs.
MK15 / MK50