Specifications - Phonic iAMP 1620 User Manual

SPECIFICATIONS

1KHz, 0.5% THD
Output Power 8 ohms
Output Power 4 ohms
Output Power 2 ohms
Input Sensitivity
Input Connector
Signal Through Out
Frequency Response
Speaker Output
Built-in Filters
S/N Ratio (20 Hz – 20 KHz)
THD@ 1 kHz (10% Rated Output)
Protection Circuitry
Power Consumption
Dimensions (WxHxD)
Weight
iAMP1620 / iAMP3020
iAMP 1620
Output Per Channel
600W
1060W
1600W
0.775 volts +/- 3% for 1 kHz 4 ohm rated power,
0.68 volts +/- 3% for 1 kHz. 2 ohm rated power
One Combo Jack (XLR+1/4") per channel
One 1/4" phone jack per channel
10Hz – 50KHz
One Speakon connector per channel
High-Pass, Sub-woofer, switchable
> 105dB A-Weighted
Less than 0.1%
Multiple Protection designs against DC bias,
thermal fault, load mismatch, etc.
800W 2Ω LOAD STEREO
483 x 105 x 415 mm (19.02" x 4.13" x 16.34")
6.1 kg (13.4 lbs)
iAMP 3020
1200W
2000W
3000W
1500W 2Ω LOAD STEREO
<10.3 kg (22.7 lbs)
3