Specifications; Dimensions - Phonic ZA100 User Manual

Wiring Zones 1 and 2 (100V)
The best way to provide power to numerous low-powered speakers
is by creating a distributed line. This allows multiple low-impedance
speakers to be used simultaneously (through use of a line trans-
former, standard in many contractor speakers). The zone 1 and
2 connectors of the ZA100(B) allow users to create a distributed
line for use with multiple speakers. Each zone provides a 100V
and a 0 connector, where 100V is connected to the power tap of
a line transformer and 0 is connected to the COM connector on
a line transformer.

SPECIFICATIONS

Power Amplifier (Watts) RMS
(at 4 Ohms) THD<0.5%
(at 8 Ohms) THD<0.5%
Frequency Response
Speaker Outputs
Low Impedance (8Ω / 4Ω)
100V Matching output
Mic Inputs
Mic/Line Inputs
Tape In
Link in / Link out
USB Player
Compatible File Types
Line Output
Master Section
Level Indicator
Alert Chime
Announce
Echo/Effect
Speaker Out Selector
Dimensions (H x W x D)
Weight
ZA100 / ZA100B
1.2W 2.5W 5W 10W
COM
8Ω
100 Watts
60 Watts
50Hz – 18KHz
European block (Screw-type)
Screw-type (Two-zone)
3 x combo jacks
2 x RCA pairs 1 x 1/4" TRS + 1 x Mini-stereo Phone Jack
ST RCA w/ Volume Control
Yes (via 1/4" Phone Jacks)
USB2.0 with LCD Display
.WAV / .MP3
1 x Stereo RCA, Link out via 1/4" Phone Jack
Volume with Bass and Treble Control
6 x LED
One Button
One Button
Echo Level Control
Zone 1 and Zone 2 Buttons
17.2" x 3.4" x 10.2" / 437 x 89 x 260 mm
16.6 lbs / 7.54 Kg
1.2W 2.5W 5W 10W
COM
8Ω 8Ω
3