Lanyard Stop Switch - Mercury 135 Pro XS OptiMax Manual

Improper fasteners or improper installation procedures can
result in loosening or disengagement of the steering link rod.
This can cause a sudden, unexpected loss of boat control,
resulting in serious injury or death due to occupants being
thrown within or out of the boat. Always use required
components and follow instructions and torque procedures.
a

Lanyard Stop Switch

The purpose of a lanyard stop switch is to turn off the engine
when the operator moves far enough away from the operator's
position (as in accidental ejection from the operator's position) to
activate the switch. Tiller handle outboards and some remote
control units are equipped with a lanyard stop switch. A lanyard
stop switch can be installed as an accessory ‑ generally on the
dashboard or side adjacent to the operator's position.
eng
GENERAL INFORMATION
!
a
27740
WARNING
a - Self‑locking nuts
27