Fuse Replacement - Mercury 135 Pro XS OptiMax Manual

Description
Nylon insert locknut "c"
Assemble steering link rod to steering cable with two flat
washers and self‑locking nylon insert locknut. Tighten locknut
until it seats, then back nut off 1/4 turn.
Assemble steering link rod to engine with special washer head
bolt and self‑locking nylon insert locknut. First torque bolt, then
torque locknut to specifications.

Fuse Replacement

IMPORTANT: Always carry spare 5 and 20 AMP fuses.
The electrical wiring circuits on the outboard are protected from
overload by fuses in the wiring. If a fuse is blown, try to locate
and correct the cause of the overload. If the cause is not found,
the fuse may blow again.
eng
MAINTENANCE
77
Nm
Tighten until it seats, then back off 1/4
lb‑in. lb‑ft
turn