Mercury 135 Pro XS OptiMax Manual page 131

2. Connect the remote oil hoses to the engine hose
connections. Fasten hose connections with cable ties.
SPEEDOMETER AND WATER PRESSURE TUBING
CONNECTIONS
NOTE: This applies to models without SmartCraft gauges.
This outboard has a speedometer water pickup located in the
leading edge of the gearcase. If you want to use this water
pickup for the speedometer, disconnect the water pickup tubing
from the speedometer sensor and route tubing out of the cowl.
Install coupler (provided with outboard) on end of tubing.
eng
OUTBOARD INSTALLATION
b
c
e
a
a -
b -
c -
d -
e -
d
3767
119
Hose clamp
Cable tie
Oil hose without
blue stripe
Oil hose with blue
stripe
Remote fuel hose