Victoria Arduino ADONIS 2 gruoups Manual page 29

To confirm press the ENTER key.
• Press the ENTER key again to go on to the next
value.
To modify the previous value, proceed as described
above.
NOTE
If the system detects a delivery time (of the sampled
amount) inferior to the programmed minimum, the
display will read:
C O A R S E GRINDING
(See chapter called "MACHINE FUNCTION
MESSAGES") which means you have to adjust
the coffee grinder to reduce the grain.
If the system detects a delivery time (of the
sampled amount) superior to the programmed
maximum, the display will read:
FINE GRINDING
(See chapter called "MACHINE FUNCTION
MESSAGES") which means you have to adjust
the coffee grinder to increase the grain. By setting
the values at 00-40, the function is excluded.
• On completion press ENTER to go on to the next
page.
HISTORICAL ALARM VISUALISATION
• The display will read:
F AULTS HIS TORY
• By pressing the ENTER, key, the display will
read:
error 01
• Pressing the  key, allows you to scroll down the
ten previous alarms saved in the memory. After
the tenth alarm, by pressing the  key again you
can go on to the next page.
MAINTENANCE PROGRAMMING
• The display will read:
M A IN TE N A NCE
By pressing the ENTER key, the display will read:
D E L IVE 10000
01 GENN U A RY 2005
• Use the   keys to set both values.
• Use the ENTER key to confirm.
Once the set delivery limit or the set maintenance
date have been reached, the display will visualize
the message:
M A IN TE N A NCE
Insert the "U" key (see chapter "USE") and set the
display back to zero by pressing the RESET key.
To go on to the next page, press the  key.
63