Victoria Arduino ADONIS 2 gruoups Manual page 27

CUP-WARMER PROGRAMMING
• The display will read:
C U P W A RMER P ROG.
• By pressing the ENTER key, the display will read
(for example):
onos off60
The words ON05 will begin to flash on and off; use
the   keys to vary the opened cup-warming
time (anywhere between 0 and 60 minutes.
• Press ENTER to confirm and to set the cup-warm-
er at OFF, which includes from 0 to 60 minutes.
NOTE
By programming one of the two ON/OFF values at 0,
will automatically exclude the function.
When the cup-warmer has been set, the button
will start to slowly flash.
• Press the ENTER key to go on to the next page.
DATE/TIME PROGRAMMING
• The display will read:
D A TE/HO U R
• By pressing the ENTER key, the display will read
for example:
thursday 10:13
14 FEBR U A RY 2008
The times will start to flash on and off.
• Vary the hours and the minutes by using the keys
 .
• Confirm by pressing the ENTER key.
Once the hours and the minutes have been varied
press ENTER again and vary the day, the month
and the year by using the same procedure as
described above.
On completion press ENTER to go on to the next
page.
GRINDING CONTROL PROGRAMMING
The Program Vip Plus model is provided with an
electronic system able to detect delivery param-
eter variations dependent on how coarse or fine
the coffee powder is.
• The display will read:
GRINDING
• By pressing the ENTER key the display will read:
D E L IVERY TIME
and in the line below, the current setting
D E L IVERY TIME
S E T
61