Victoria Arduino ADONIS 2 gruoups Manual page 26

This indicates the total amount of deliveries
made.
• To set the counter back to zero press RESET.
• To access total counts per waiter press ENTER.
• By pressing the  key the display will read:
C L E A NING CO U N TE R
To access the automatic cleaning counter press
ENTER.
• The keys will flash on and off; by pressing
the unit key the number of cleaning cycles effected
will appear. By pressing the key (reset) for 5 sec-
onds the counter will be set back to zero.
60
ON / OFF PROGRAM.
• The display reads:
ON-OFF P ROGR A M
• By pressing the ENTER key, the display will read:
MOND A Y
on 07:30 off 23:30
where the ON and OFF values indicate when the
machine will turn on and off.
• Press   to change the day forward and back-
ward.
• Press ENTER to vary the programmed starting up
time (the message ON 07:30 will start to flash on
and off).
• Use the   keys to vary the starting up time.
• Press ENTER to confirm and to go on to the
programmed switching off time (the message OFF
23.30 will start to flash on and off).
• Use the   keys to vary the switching off time.
• Confirm by pressing ENTER.
• To de-activate the on/off function on weekly day-
off, press RESET.
The display will read:
D A Y OFF
(to reinstate, press RESET)
After the word SUNDAY, by pressing  again, a
beep will signal that you have come to the follow-
ing page.