Victoria Arduino ADONIS 2 gruoups Manual page 25

• Select one or more continue keys (the key or keys
selected will remain lit up).
The key or keys will recall the selected unit's
standard doses.
• Press the ENTER key to confirm.
The display will read:
P ROGR A M DO S E S
S E L E C T
NOTE
all the selections can be programmed for a maximum
of two minutes; after that time a flashing message will
appear on the display saying:
ERROR
DELIVERY COUNT
• The display will read:
D E L IVERY CO U N T
• By pressing the ENTER key the display will read:
S E L E C TION TO TAL
• All the delivery keys will start to flash on and off.
By pressing one of the delivery keys the amount of
the deliveries made will be visualised.
• To set the counter back to zero, press the RESET
key.
NOTE
The continuous coffee equals one delivery.
• Press ENTER to access waiter counts (if pro-
vided).
• Press the  key and the display will read:
GRO U P TO TAL
All the units' small coffee keys
flash on and off.
Example:
By selecting one of the first unit's keys (the select-
ed key will remain lit up) the display will read:
GRO U P TO TAL
GR. 1 DE L I.
which means the total amount of deliveries for that
unit.
• To set the counter back to zero press RESET.
• To access the waiter counter press ENTER.
• When the display reads:
GRO U P TO TAL
press  and the display will read:
M A CHINE TO TAL
will begin to
59