Epson S5 Series User Manual page 59

3. Press
Enter
button to select any of the following options:
Enter
■
Auto Setup
Leave this setting
image. Turn it off if you want to save adjustments you have
made to the video settings.
■ Tracking
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals. See page 90 for more information about adjusting the
tracking.
■
Sync
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 90 for more information about adjusting the sync
setting.
■
Position
Use the arrow buttons to move the image on the screen left,
right, up, or down.
■
Progressive
Leave this setting
video so that interlaced-to-progressive conversion is carried
out (best for fast-moving pictures). If you notice flickering
while viewing still images, switch this setting to
■
Computer Input
Selects the signal from equipment connected to the
Computer (Component Video)
look wrong, try changing this setting from
following:
Component Video
Downloaded From projector-manual.com Epson Manuals
. Then use the up and down arrow buttons and the
(computer images)
to automatically optimize the computer
ON
(computer images)
(computer images)
when viewing S-Video or composite
ON
for computer or RGB video sources, or
RGB
for component video sources.
.
OFF
port. If your image colors
to one of the
Auto
note
If you have repositioned the
image but then change your
mind, you can press the
button on the
Enter/Auto
remote control to restore the
default settings.
Fine-tuning the Projector
59