Epson S5 Series User Manual page 87

If you're using a PowerBook or iBook with
Macintosh OS X:
1. From the Apple menu, select
Display
2. Select
VGA Display
Arrangement
The message
Make sure your computer's resolution doesn't exceed XGA (for
■
the PowerLite 77c) or SVGA (for the PowerLite S5 Series) and
the frequency is supported by the projector. See page 98. If
necessary, change your computer's resolution setting as described
below.
Make sure the correct
■
menu. See page 60. It should normally be set to
The buttons on the projector don't work.
The Operation Lock may be enabled. Press and hold the
on the projector for 7 seconds to release the lock.
Only part of the computer image is displayed.
If you're projecting from a computer or RGB video device, press
■
the
Auto
you're projecting from a component, composite, or S-Video
device, you may need to adjust the
menu. See page 59 for more information.
If you've enlarged part of the image using the
■
the remote control, press the
return to full display.
Try pressing the
■
different aspect ratio (ratio of length to height).
Downloaded From projector-manual.com Epson Manuals
System Preferences
or .
Displays
or
Color LCD
, then put a checkmark in
is displayed.
Not Supported
Video Signal
button on the remote control. If this doesn't work or if
Esc
button on the remote control to select a
Aspect
, then click
, click or
Arrange
Mirror Displays
is selected in the Signal
.
Auto
Enter
setting in the Signal
Position
button on
E-Zoom
button to cancel zooming and
.
button
Solving Problems
87