Turning On The Password And User's Logo - Epson S5 Series User Manual

2. Select
Password
the password?
3. Select
Yes
4. Enter a 4-digit number using the numeric buttons on the remote
control, as shown.
The password will be displayed as
digit, a confirmation screen appears. Enter the password again.
You see the message
5. After you finish setting the password, press the
return to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.

Turning On the Password and User's Logo

1. Press the
7 seconds until you see the Password Protect menu.
2. To enable the password, select
. Select
Enter
3. To enable your screen logo, select
. Select
Enter
When this feature is on the logo appears whenever the projector is
turned on (if the
menu; see page 63) and as the A/V Mute screen (if you selected
the
Logo
None of the User's Logo features can be changed when the User's
Logo Protect function is enabled.
4. Press
Menu
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
You can attach the password protect sticker to the projector as an
additional theft deterrent.
Downloaded From projector-manual.com Epson Manuals
and press
Enter
and press .
Enter
Password accepted
button on the remote control for about
Freeze
Power On Protect
then press
ON Esc
and press
ON Enter
Startup Screen
as the
Display Background
to close the Password Protect menu.
. You see the message
. After you enter the last
****
.
button to
Esc
and press
.
User's Logo Protect
.
is enabled in the Extended
in the Extended menu).
Change
Numeric buttons on
remote control
and press
Fine-tuning the Projector
69