Solving Problems With The Remote Control - Epson S5 Series User Manual

Solving Problems
92
Downloaded From projector-manual.com Epson Manuals
Solving Problems with the Remote
Control
The projector doesn't respond to remote control commands.
Make sure you are within 20 feet of the projector, and within
■
range of the projector's front or back sensor (approximately 30° to
the left or right and 15° above or below).
If a button on the remote control is held for more than 30
■
seconds, the remote enters sleep mode. Press another button for
normal operation.
The remote control batteries may not be installed correctly or may
■
be low on power. Replace the batteries as described on page 49.
Dim the room lights and turn off any fluorescent lights. Make
■
sure the projector is not in direct sunlight. Strong lighting,
especially fluorescent lights, may affect the projector's infrared
receivers.
Turn off any nearby equipment that emits infrared energy, such
■
as a radiant room heater.
You have lost the remote control.
You need the remote control to access many projector features. If you
have lost it, you can order another from Epson. See page 94 for
details.
The Page Up and Down buttons on the remote control don't
work.
Make sure the USB mouse cable is securely connected to both
■
your computer's USB port and the projector's USB port. For
details, see page 21.
■ Your computer must be connected to the
(Component Video)
Computer
port on the projector.