Connecting A Component Video Source - Epson S5 Series User Manual

Setting Up the Projector
28
Downloaded From projector-manual.com Epson Manuals

Connecting a Component Video Source

If your video source has component video connectors, you can use
them to project a higher quality video image. You'll need a
component video cable, which can be purchased from Epson (part
number ELPKC19). See page 14 for ordering information.
Before starting, make sure the projector and your DVD player or
other video device are turned off.
1. Connect the large end of the component video cable to the
projector's
Computer (Component Video)
2. Insert the three ends of the component video cable into the
, , and ports on your video source.
R G B
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to your projector, select
Computer (Component Video)
button on the projector or the remote control. See
Source Search
page 34.
port.
Connect component
video cable
as the source by pressing the