Correcting Computer Images; Adjusting The Volume - Epson S5 Series User Manual

Correcting Computer Images

If you've connected a computer and the image doesn't look right, or it
doesn't fit properly on the screen, press the
projector or the
automatically resets the projector's tracking, sync, resolution, and
position settings. You must be projecting a computer image for this
button to have any effect. Additionally, if the
the Signal menu is set to
page 59.

Adjusting the Volume

You can use the
increase or decrease the volume for the projector's built-in speaker.
On the PowerLite 77c, you can also use the buttons on the projector
to control the volume. Press the
the button to decrease it. A volume gauge appears on the screen
while the volume is being adjusted.
Downloaded From projector-manual.com Epson Manuals
button on the remote control. This
Enter/Auto
, the Auto function will not work. See
OFF
and buttons on the remote control to
Vol– Vol+
button to increase the volume, or
button on the
Enter
option in
Auto Setup
PowerLite 77c only
note
You can also adjust the
volume using the projector's
Settings menu. See page 61
for details.
You must adjust the volume
separately for each input
source.
Projecting
41