Cannot Detect The Machine During Wired Lan Setup: Check 3 - Canon mg 7100 series Online Manual

Cannot Detect the Machine during Wired LAN Setup: Check 3

Is the wired LAN setting of the machine enabled?
By using the operation panel of the machine, confirm the wired LAN setting of the machine.
Select Setup on the HOME screen, then select Device settings > LAN settings > Change wireless/
wired.
Make sure that Wired LAN active is selected on the touch screen.
If Wired LAN active is not selected:
The wired LAN setting of the machine is not activated. Activate the wired LAN setting of the machine.
After activating the wired LAN setting, click Back to Top on the Check Printer Settings screen to try to
set up the network communication from the beginning.
If Wired LAN active is selected:
Go to check 4.
Cannot Detect the Machine during Wired LAN Setup: Check 4
27