Canon mg 7100 series Online Manual page 130

1007
Cause
Possible causes include the following.
• There is no paper in the cassette (upper).
• The paper source is incorrect.
• Paper is not loaded properly.
Action
Take the corresponding actions below.
• Load paper in the cassette (upper).
• Load paper in the paper source suitable for the paper size.
The small size photo paper such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm), or Hagaki can be
loaded in the cassette (upper).
Important
• If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) and try
to print on it, the paper jam will occur.
• Align the paper guides with the both edges of the paper when you load paper.
After carrying out the above measures, tap OK on the touch screen to dismiss the error.
130