Canon mg 7100 series Online Manual page 103

• The specified PDF file contains unprintable data. Some portions may not be
printed.
PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before
printing is completed. In this case, print from the computer.
• The card is currently writable from PC. Set to [Not writable from PC].
The card slot is set to Writable from USB PC or Writable from LAN PC.
You cannot print from the memory card or save the scanned data to the memory card when the card
slot is set to Writable from USB PC or Writable from LAN PC. After writing on the memory card,
select Not writable from PC in Read/write attribute under Device user settings.
• Power was not turned off correctly the last time. Press the
turning power off.
The power cord may have been unplugged last while the machine was still on.
Tap OK on the touch screen to dismiss the error.
Note
• See Notice for Unplugging the Power Cord for unplugging the power cord.
• Cannot connect to the server. Please wait a while and try again.
You cannot connect to the server due to some communication error. When you have tried to access a
photo sharing site, it is possible that your photos have been deleted.
Tap OK on the touch screen to dismiss the error, then try again after a while.
Error Regarding Automatic Duplex Printing Is Displayed
See Cannot Print Properly with Automatic Duplex Printing
Check
appropriate action.
The Inkjet Printer/Scanner/Fax Extended Survey Program Icon Appears
If the Inkjet Printer/Scanner/Fax Extended Survey Program is installed, the printer and application
software usage information is scheduled to be sent every month for about ten years. The Inkjet Printer/
Scanner/Fax Extended Survey Program icon appears in the Dock when it is time to send the printer
usage information.
Read the instructions on the screen after clicking the icon, then follow the procedure below.
103
button when
and take the