Using Special Effects - Picture Effect - Sony DCR-TRV140 Service Manual

Using the fader function
MONOTONE
When fading in, the picture gradually changes
from black-and-white to colour.
When fading out, the picture gradually changes
from colour to black-and-white.
(1) When fading in [a]
In the standby mode, press FADER until the
desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the
desired fader indicator flashes.
The indicator changes as follows:
t FADER t M.FADER t STRIPE*
1)
r
no indicator BOUNCE* 2)
R r
DOT* 2) * 3) MONOTONE
R
T OVERLAP* T
WIPE* 2) * 3) 2) * 3)
The last selected fader mode is indicated first
of all.
(2) Press START/STOP. The fader indicator stops
flashing.
After the fade in/out is carried out, your
camcorder automatically returns to the
normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER
until the indicator disappears.
* 1) CCD-TRV107E/TRV108E/TRV208E/TRV408E
only
2)
* Fade in only
* 3) DCR-TRV140E only
Using special effects
– Picture effect
You can digitally process images to obtain special
effects like those in films or on the TV.
NEG.ART [a] : The colour and brightness of the
picture are reversed.
SEPIA : The picture is sepia.
B&W : The picture is monochrome
(black-and-white).
SOLARIZE [b] : The light intensity is clearer, and
the picture looks like an
illustration.
SLIM [c] : The picture expands vertically.
STRETCH [d] : The picture expands
horizontally.
PASTEL [e] : The contrast of the picture is
emphasised, and the picture
looks like an animated cartoon.
MOSAIC [f] : The picture is mosaic.
(1) [a]
[b]
t FADER t M.FADER t STRIPE*
1)
r
BOUNCE* 2)
R r
DOT* 2) * 3) MONOTONE
R
T OVERLAP* T
WIPE* 2) * 3) 2) * 3)
(2)
1
FADER
FADER
1)
*
* 2)
3)
*
NEG.ART [a] :
SEPIA :
B&W :
SOLARIZE [b] :
SLIM [c] :
STRETCH [d] :
PASTEL [e] :
MOSAIC [f] :
DCR-TRV140/TRV140E/TRV140M
Using the fader function
Note (DCR-TRV140E only)
You cannot use the following functions while
using the fader function. Also, you cannot
use the fader function while using the following
functions:
– Digital effect
– Super NightShot
– Colour Slow Shutter
– Tape photo recording
Before operating the overlap, wipe, or dot
function (DCR-TRV140E only)
Your camcorder stores the image on the tape. As
the image is being stored, the indicator flashes
quickly, and the image you are shooting
disappears from the screen. Depending on the
tape condition, the image may not be recorded
clearly.
The date, time indicator and title do not fade
in or fade out (CCD-TRV107E/TRV108E/
TRV208E/TRV408E only)
Erase them before operating the fader function if
they are not needed.
While using the bounce function, you cannot
use the following functions:
– Focus
– Zoom
– Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the
following mode or functions:
– D ZOOM is activated in the menu settings
– Wide mode
– Picture effect
– PROGRAM AE
59 60
Using special effects
– Picture effect
(1) In CAMERA mode, select P EFFECT in
the menu settings (p. 136).
(2) Select the desired picture effect mode in the
menu settings, then press the SEL/PUSH
EXEC dial.
To cancel the picture effect function
Set P EFFECT to OFF in the menu settings.
While using the picture effect function
(DCR-TRV140E only)
You cannot select OLD MOVIE with the digital
effect function.
When you set the POWER switch to OFF (CHG)
Your camcorder automatically returns to the
normal mode.
61 62
1-13
in (1)
(2)
1
DCR-TRV140E
MA NU A L S E T
PROGRAM AE O F F
P E F F E C T N E G
D E F F E C T S E I P
A U T O S H T R B & W
R E T U R N
S O L
S I L
S T R
P A S
M O S
[ ME NU ] : E ND
CCD-TRV107E/TRV108E/
TRV208E/TRV408E
MA N U A L S E T
PROGRAM AE O F F
P A S
P E F F E C T
R E T U R N N E G
S E I P
B & W
MENU
S O L
M O S
S I L
S T R
[ ME NU ] : E ND
. A R T
A
A R Z I E
M
E T C H
T E L
I A C
T E L
. A R T
A
A R Z I E
A I C
M
E T CH