Viewing The Recording On Tv - Sony DCR-TRV140 Service Manual

DCR-TRV140/TRV140E/TRV140M
Playing back a tape
Various playback modes
To operate video control buttons, set the
POWER switch to PLAYER.
To view a still image (playback
pause)
Press X during playback. To resume playback,
press X or N.
To advance the tape
Press M in the stop mode. To resume normal
playback, press N.
To rewind the tape
Press m in the stop mode. To resume normal
playback, press N.
To change the playback direction
(DCR-TRV140E only)
Press on the Remote Commander during
playback to reverse the playback direction. To
resume normal playback, press N.
To locate a scene monitoring the
picture (picture search)
Keep pressing m or M during playback. To
resume normal playback, release the button.
To monitor the high-speed picture
while advancing or rewinding the
tape (skip scan)
Keep pressing m while rewinding or M while
advancing the tape. To resume rewinding or
advancing, release the button.
Playing back a tape
When the playback pause mode lasts for
3 minutes* 1) /5 minutes* 2)
Your camcorder automatically enters the stop
mode. To resume playback, press N.
Note on the slow playback mode
(DCR-TRV140E only)
The slow playback can be performed smoothly
on your camcorder; however, this function does
not work for an output image from the DV
OUT jack.
If slow playback lasts for about 1 minute
(CCD-TRV107E/TRV208E/TRV408E only)
Your camcorder automatically returns to normal
speed.
When you play back a tape recorded in the LP
mode (CCD-TRV107E/TRV108E/TRV208E/
TRV408E only)
Noise may appear during playback pause mode,
slow playback* 3) or picture search.
When you play back a tape in reverse
(CCD-TRV107E/TRV108E/TRV208E/TRV408E
only)
Horizontal noise may appear at the centre or top
and bottom of the screen.
This is not a malfunction.
* 1) DCR-TRV140E only
* 2) CCD-TRV107E/TRV108E/TRV208E/TRV408E
only
3)
* CCD-TRV107E/TRV208E/TRV408E only
X
X N
M
N
m
N
N
m M
m
M
* 1) * 2)
N
* 3)
* 1)
* 2)
3)
*
Playing back a tape
To view the picture at slow speed
(slow playback) (CCD-TRV107E/
TRV208E/TRV408E, DCR-TRV140E only)
Press y on the Remote Commander during
playback.
For slow playback in the reverse direction, press
, then press y on the Remote Commander.*
To resume normal playback, press N.
To view the picture at double speed
(DCR-TRV140E only)
Press ×2 on the Remote Commander during
playback. For double speed playback in the
, then press ×2 on the
reverse direction, press
Remote Commander. To resume normal
playback, press N.
To view the picture frame-by-frame
(DCR-TRV140E only)
Press C on the Remote Commander in the
playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To
resume normal playback, press N.
To search the last scene recorded
(END SEARCH)
Press END SEARCH in the stop mode. The last 5
seconds of the recorded section are played back
and the playback stops.
In the various playback modes
•Sound is muted.
•The previous recording may appear as a mosaic
image when playing back.* 1)
47 48
Viewing the recording
on TV
Connect your camcorder to your TV with the A/
V connecting cable supplied with your
camcorder to watch the playback picture on the
TV screen. You can operate the playback control
buttons in the same way as when you monitor
playback pictures on the LCD screen. We
recommend that you power your camcorder
from a wall socket using the AC power adaptor
when monitoring the playback picture on the TV
screen (p. 23). Refer to the operating instructions
of your TV.
Open the jack cover. Connect your camcorder to
the TV using the A/V connecting cable. Then, set
the TV/VCR selector on the TV to VCR.
– CCD-TRV107E/TRV108E/TRV208E/TRV408E
CCD-TRV408E
A/V connecting cable (supplied)/
: Signal flow/
49 50
1-10
1)
y
* 1)
N
×
×
N
C
c
N
1)
*
Yellow/
S VIDEO OUT
IN
A/ V OUT
S VIDEO
VIDEO
AUDIO
Black/
y