Flavel REGENT L.F.E. RC Installation, Maintenance & User Instructions page 31

REMOVAL / REFITTING OF THE FUELBED CERAMICS
a) Fit the rear fuelbed section to the combustion chamber, locating behind
the support bracket as indicated below in Fig. 3
Fig. 3
b) Fit the front section of the fuelbed to the combustion chamber, locating
behind the front casting as shown overpage in Fig. 4
Fig. 4
c) Refit the dress guard.
Fit rear section of
fuelbed behind sup-
port bracket as
shown
Fuelbed front section
fits behind the front
casting as shown