Flavel REGENT L.F.E. RC Installation, Maintenance & User Instructions page 20

Fig. 10
c) Remove the black painted heat shield by removing the L/H/S & R/H/S
retaining screws. Unhook the burner heat shield from the L/H & R/H
retaining holes and lift forward to remove, as shown below in Fig. 11
Fig. 11
d) Remove the four burner retaining screws, disconnect the pilot assy. and
lift the burner clear
20
Front bezel
retaining screws
(1 off each side)
Burner retaining
screws (2 off at
each end of
burner)
Burner Heat
Shield is
removed by
unhooking
from the
holes as
shown