Wwan Module - HP ElitePad 1000 G2 Maintenance And Service Manual

WWAN module

Description
HP lt4226 LTE/HSPA+ 4G Module
HP lt4225 LTE/EV-DO Gobi 4G Module
HP lt4112 LTE/HSPA+ 4G Module
HP lt4111 LTE/EV-DO/HSPA+ 4G Mobile Broadband Module
HP hs3110 HSPA+ Intel Mobile Broadband Module
Before removing the WWAN module, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display assembly (see
5. Remove the NFC antenna (see
Remove the WWAN module:
1. Release the grounding tape (1) that secures the WWAN module to the system board.
2. Disconnect the WWAN antenna cables (2) from the terminals on the WWAN module.
NOTE:
"5". The WWAN antenna cable labeled "6" connects to the WWAN module "AUX/GPS" terminal labeled
"6".
3. Remove the Phillips PM1.3×1.5 broad head screw (3) that secures the WWAN module to the
bottom cover.
36 Chapter 5 Removal and replacement procedures
NFC antenna on page
The WWAN antenna cable labeled "5" connects to the WWAN module "MAIN" terminal labeled
Display assembly on page
35).
Spare part number
736675-005
820019-005
740011-005
753080-005
822829-005
28).