Operation - Sharp IG-DX10A Operation Manual

OPERATION

To change the operation mode
During the operation, Plasmacluster Ion Sign (blue) is lighting.
RESET
Press 3s.
FILTER
UNIT
CLEAN
Press
< To change wind direction >
For the horizontal louver at the
back, adjust angle by rotating the
adjustment dial (x2).
For the vertical louver, adjust
the orientation manually.
LOW
Lighting
HIGH
Lighting
FULL POWER
Lighting
'OFF'
< How to carry >
H a v e h a n d s o n t h e
handle and hold it with
both hands.
E-8
If you want to operate the product in
silence
• Reduce the operation sound at "LOW"
operation and release high-density
Plasmacluster ions quietly.
If you want to operate the product at
strong air fl ow rate
• I n c r e a s e t h e c o n c e n t r a t i o n o f
Plasmacluster ion in order to enhance the
effectiveness of the Plasmacluster ion.
I n c r e a s e t h e c o n c e n t r a t i o n o f
Plasmacluster ion to approx. 1.5 times
of "HIGH" at strong air fl ow rate
• Please use this operation when you are
nervous about pollution of air.
• When you come back home from outside
• During or after using vacuum cleaner
• When you want to remove an odor rapidly
• Remove odor after cooking or when
drying clothes in a room
Power 'OFF'.
< To use a stand >
Install it so that the center
of the stand comes to the
center of the main unit.
(Use the stand as occasion
demands.)