Troubleshooting
Problem: Power not transmitted from engine to wheels
Condition
1. Rear axle shaft serration worn - broken
Problem: Power not transmitted from engine to either front wheel
Condition
1. Secondary drive - driven gear teeth broken
2. Propeller shaft serration worn - broken
3. Coupling damaged
4. Coupling joint serration worn - damaged
5. Front drive - driven bevel gears broken - damaged
6. Front differential gears/pinions broken - damaged
7. Front drive actuator not operating
Back
Back to TOC
Remedy
1. Replace shaft
Remedy
1. Replace gear(s)
2. Replace shaft
3. Replace coupling
4. Replace joint
5. Replace gear(s)
6. Replace gears - pinions
7. Replace fuse - 2WD/4WD switch - front drive actuator
Back to Section TOC
6
6-27