Advertisement
Available languages
Available languages
15. The appliance is for domestic use only.
16. If the appliance is used for other purposes than intended, or
is it not handled in accordance with the instruction manual,
the full responsibility for any consequences will rest with
the user. Any damages as a consequence of the above to
the product are not covered by the warranty.
Before use
Clean the jug, the lid and the feeding lid in water and some detergent. The knife
at the bottom of the bowl is extremely sharp and should be handled with great
care. The knife insert can be removed and washed separately, see more in section
"Cleaning and Maintenance". Use a damp cloth for cleaning of the motor part.
Parts of the appliance (see fig. 3)
1. Feeding lid
2. Lid
3. Glass jug
4. Knife holder
5. Rubber gasket
6. Locking ring
7. Motor part
8. Speed selector
9. Function buttons
Use
The blender is used for blending, chopping, pureeing and mixing e.g. milk shakes,
baby food, soups and sauces. Furthermore, you can crush ice for drinks etc.
Assemble the blender after cleaning by first putting the glass carafe upside down.
Pull the gasket onto the knife holder and position the knife holder with the gasket
and locking ring in the opening at the bottom of the jug. Screw the klocking ring
onto the jug until it is completely tight. Check that it is properly fastened.
Put the glass jug on the motor part by inserting the jug into the grooves of the
motor part and turn it clockwise until it engages with a click. Test that the jug is
properly positioned. Note that you cannot activate the appliance if the jug is not
positioned correctly on the motor part.
The motor of the mixer runs the knife blades at high speed in order to ensure a
thorough mixing. Consequently, it is important that the blender is always placed
on an even and dry surface before it is switched on.
6639_IDV_0413.indd 29
29
2013-06-27 10:05:17
Advertisement
