Table of Contents
Advertisement
REPAIR INSTRUCTIONS
Service testroutines
This appliance has been equipped with special "service" routines to be able to check several functions of the appliance.
With the counting procedure can be checked how (intense) the machine has been used by the consumer.
Items that are monitored:
Number of Coffee made, liters of water used, number of descaling procedures performed, number of cleaning/washing cycles
performed.
Entering the counting menu
1. Disconnect the appliance from mains.
2. Press simultaneously "MENU" and
3. Connect the appliance to mains.
4. If above steps succeeded the display will show the following message
"TOT. COFFEE XXX"
"TOT. WATER
* where XXX is number of cups or Liters
5. Press
button to step to the next display message
"DESCALING
"WASHING
* where XXX is number of cycles performed
6. Press
button to step to the next display message
"SW RELEASE POW 15"
"SW RELEASE DIS
* where POW 15 stands for power PCB software version release 1.5
* where DIS 15 stands for display PCB software version release 1.5
7. Press
button, step 4 will be repeated.
To leave the service/test mode unplug the appliance from the mains.
COUNTING PROCEDURE
MENU
OK
button.
XXX"
XXX"
XXX"
15"
OFF
ON
HD5720/30
6-23
Hide quick links:
Advertisement
Table of Contents
