Table of Contents
Advertisement
GRINDER ADJUSTMENTS
1
Remove the coffee beans container,
the black fi nger saver and the knob.
4
Remove the white plastic ring by
pulling it.
7
Insert the white shaft, making sure
its larger notch is aligned with the
one on the grinder.
(*) before to change the setting, check and mark the initial position taking as reference the position of the metal ball you see
through the holes on the white ring.
Change the setting carefully by turning the white ring of one or max two steps (one or two holes) either way as required.
2
Turn the white shaft clockwise till it
stops. Remove the upper part of the
grinder by pulling it upwards.
5
Turn the white shaft counter-
clockwise till it stops.
Pull to remove it.
8
Insert the white ring making sure
its notch as well is inserted on the
correct position.
HD5720/30
3
Verify the position of the white
gasket (has to be as on the picture)
6
Now you can change the setting:
Turn the gear clockwise* to reduce
the coarseness (fi ner coffee).
Turn the gear counterclockwise* to
increase the courserness (thicker).
9
Turn the shaft CLOCKWISE till it
stops to insert the upper gear.
Then turn the shaft all the way
COUNTER CLOCKWISE.
17-23
Hide quick links:
Advertisement
Table of Contents
