Download Print this page
Philips Premium One-touch HD5730/10 Service Manual

Philips Premium One-touch HD5730/10 Service Manual

Hide thumbs Also See for Premium One-touch HD5730/10:

Advertisement

Quick Links

Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
Published by Philips Domestic Appliances and Personal Care
08/02
Premium One-touch Espresso maker
TECHNICAL INFORMATION
- Power rated
- Standby power
(switched off )
- Standby power
(switched on)
- Voltage
- Colour setting
- SAP coding
OPTIONAL (accessories)
- Hardness test strip
- Durgel bottle DE - GB
- Durgel bottle GB - NL
Printed in the Netherlands
HD5730/10
: 1350 W
: 3 W
: 80 W
: 220 - 240 V / 50 - 60 Hz
: Brushed stainless steel Gun metal
: HD5730/10
Service code : 4222 459 45145
Service code : 4222 459 45200
Service code : 4222 459 45201
© Copyright reserved
Subject to modification

Advertisement

loading

Summary of Contents for Philips Premium One-touch HD5730/10

  • Page 1 - Durgel bottle DE - GB Service code : 4222 459 45200 - Durgel bottle GB - NL Service code : 4222 459 45201 Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification...
  • Page 2 DISASSEMBLY- AND RE-ASSEMBLY ADVISE HD5730/10 - Now remove on both sides the upper and lower screws For your safety, be sure the plug is where the control panel is fixed to the frame! disconnected from the mains! See picture for positions. - In below steps the dismantling from the appliance has been written down in a certain sequence.
  • Page 3 REPAIR INSTRUCTIONS HD5730/10 All the display messages that are described in this service manual are in English language. If you want to change the language to English, proceed as follows. 1. Switch appliance on. 2. Press the MENU button. 3. Navigate with the until Display message SET LANGUAGE? appear.
  • Page 4 REPAIR INSTRUCTIONS HD5730/10 - Electrical circuit Reed sensor IFD Boiler Temp. sensor Black Green Temperature Control sensor Board Blue White Blue Brewing White unit Hall Brewing up pos. sensor unit down pos. Brown Brown Brown 2 way Discharge Steam Milk electrovalve Water valve...
  • Page 5 REPAIR INSTRUCTIONS HD5730/10 Working principle of the appliance To understand the appliance better, hereby a short technical description of the working principle. When the appliance has been plugged on the mains, the appliance starts with a self diagnose. First items that will be checked are: - Temperature sensor(s), state of micro switches.
  • Page 6 REPAIR INSTRUCTIONS HD5730/10 Service testroutines This appliance has been equipped with special “service” routines to be able to check several functions of the appliance. COUNTING PROCEDURE With the counting procedure can be checked how (intense) the machine has been used by the consumer. Items that are monitored: Number of Coffee made, liters of water used, number of descaling procedures performed, number of cleaning/washing cycles performed and number of cappuccinos made.
  • Page 7 REPAIR INSTRUCTIONS HD5730/10 For repair solutions it is good to know if the descale procedures are performed in line with the coffee/cappuccinos brewed. In below table you can fi nd the values depending on the water hardness setting when the appliance will inform the consumer that the appliance has to be descaled! Water hardness Litres water after which the decalcifying...
  • Page 8 REPAIR INSTRUCTIONS HD5730/10 PUTTING THE APPLIANCE INTO SERVICE/TEST MODE MENU 1. Disconnect the appliance from mains. 2. Press simultaneously Coffee buttons. 3. Connect the appliance to mains. 4. If above steps succeeded the display will show the following message “LOAD TEST MODE” Using the functions in the Service/test mode.
  • Page 9 REPAIR INSTRUCTIONS HD5730/10 * When powering the heaters in the system via the service test mode be warned that you not power the heaters too long, the software is not protecting the heaters in this state!! To leave the service/test mode unplug the appliance from the mains. PUTTING THE APPLIANCE INTO DISPLAY TEST MODE * (Factory Virgin mode) MENU...
  • Page 10 REPAIR INSTRUCTIONS HD5730/10 Temperature measurement. COFFEE TEMPERATURE MEASUREMENT PROCEDURE MENU 1. Switch appliance on. 2. Make sure appliance factory default settings are stored. 3. place a plastic cup under the coffee spout. 4. Set grinder setting on position 7. 5. Fill water tank and bean compartment. 6.
  • Page 11 REPAIR INSTRUCTIONS HD5730/10 WATER TEMPERATURE MEASUREMENT PROCEDURE MENU 1. Switch appliance on. 2. Make sure appliance factory default settings are stored. 3. Install water spout. 4. Place a plastic cup under the water spout. 5. Fill the water tank with water. 6.
  • Page 12 REPAIR INSTRUCTIONS HD5730/10 Check Milk froth foam quality. Offi cial test according IEC-60661. Before performing the test the following is needed: Partially Skimmed cold milk. (fat 1.5 %) Cylindrical glass 75 - 80 mm with inner diameter 80 ± 2 mm. MILK FROTH QUALITY MEASUREMENT PROCEDURE MENU 1.
  • Page 13 REPAIR INSTRUCTIONS HD5730/10 To practical judge the foam height/quality see picture for references. Milk foam quality current Galileo (reference) Characteristics: - Solid foam layer - Small bubbles in foam layer - Keeps sticking on spoon ± 25mm 90mm = changed 13-26...
  • Page 14: Troubleshooting

    TROUBLE SHOOTING HD5730/10 Technical related problems. Warning: Live Voltage is applied to the micro switches used in the appliance!!!!! Always disconnect plug from the mains when repairing! When the appliance generates a GENERIC ALARM message, the only way to reset this is by unplugging the power plug from the mains.
  • Page 15 TROUBLE SHOOTING HD5730/10 FAILURES WHEN SWITCHING ON THE APPLIANCE Problem description / Actions to perform Hints/tips/solution “Error” message displayed MESSAGE • Fill tank with water. • Check if fi lled tank is inserted correctly. • Check presence of Magnet in tank or see if No WATER ! it is jammed.
  • Page 16 TROUBLE SHOOTING HD5730/10 FAILURES DURING OPERATING THE APPLIANCE Problem description / Actions to perform Hints/tips/solution “Error” message displayed MESSAGE • Fill container with beans. • Check if beans are visible in the grinder. • No motor sound during grinding process is •...
  • Page 17 TROUBLE SHOOTING HD5730/10 FAILURES DURING OPERATING THE APPLIANCE Problem description / Actions to perform Hints/tips/solution “Error” message displayed MESSAGE • When water is pumped through the system, the fl ow meter measures the Please wait….. pumped volume. When the system detects Flushing….
  • Page 18: Other Failures

    TROUBLE SHOOTING HD5730/10 OTHER FAILURES Problem description Actions to perform Hints/tips/solution During heating up water is • The valve construction in the (yellow • Check the O-rings in the brewing dripping from the Brewing unit. tube) thermo heater became defect. unit (pos 45) •...
  • Page 19 TROUBLE SHOOTING HD5730/10 OTHER FAILURES Problem description Actions to perform Hints/tips/solution The coffee tastes bad. • Taste is really user depended, only • Clean the appliance with the ‘cleaning’ cleaning, descaling and checking function in the menu. of the grinder adjustment are •...
  • Page 20 GRINDER ADJUSTMENTS HD5730/10 Remove the coffee beans container, Turn the white shaft clockwise till it Verify the position of the white the black fi nger saver and the knob. stops. Remove the upper part of the gasket (has to be as on the picture) grinder by pulling it upwards.
  • Page 21: Descaling The Appliance

    DESCALING THE APPLIANCE HD5730/10 Proceed as follows: • Place the WATER SPOUT • Press the MENU button. • Press the button until the message ‘START DESCALING?’ appears on the display. • Press OK. • The message ‘ADD DESCALER! - Push OK when ready’ appears on the display. ®...
  • Page 22: Parts List

    PARTS LIST HD5730/10 Service code Description Service code Description 4222 459 45085 Strength selection cap 4222 459 45130 4222 459 45135 Strength selection knob 4222 459 45115 Valve 4222 459 45168 Left side panel 4222 459 45178 Spring 4222 459 45134 Beans container 4222 459 45107 Filter...
  • Page 23: Exploded View

    EXPLODED VIEW HD5730/10 23-26...
  • Page 24 EXPLODED VIEW HD5730/10 24-26...
  • Page 25 EXPLODED VIEW HD5730/10 25-26...
  • Page 26 EXPLODED VIEW HD5730/10 26-26...