REPAIR INSTRUCTIONS
Temperature measurement.
1. Switch appliance on.
2. Make sure appliance factory default settings are stored.
3. Place a plastic cup under the coffee spout.
4. Set grinder setting on position 7.
5. Fill water tank and bean compartment.
6. Press the
button.
7. During the cup is filled with Coffee measure the temperature.
8. Repeat step 6 – 7 once and note the highest measured temperature.
9. For validation see table below.
1. Switch appliance on.
2. Make sure appliance factory default settings are stored.
3. Place a plastic cup under the steam nozzle.
4. Fill the water tank with water.
5. Press
the button and turn the steam knob open.
6. During the cup is filled with water measure the temperature.
7. Repeat step 5 – 6 once and note the highest measured temperature.
8. For validation see table below.
Beverage
Coffee temperature (°C)
Hot water
= changed
COFFEE TEMPERATURE MEASUREMENT PROCEDURE
MENU
OK
WATER TEMPERATURE MEASUREMENT PROCEDURE
Function
Long Coffee
Water
OFF
ON
Temperature spec.
≥ 75°C
≥ 70°C
HD5720/30
10-23