Safety Sign Locations; 3�1 Safety Sign Locations - 3 Panel - Wallenstein WX510 Operator's Manual

3

SAFETY SIGN LOCATIONS

3.1 SAFETY SIGN LOCATIONS - 3 PANEL
The types of safety signs and locations on the equipment are shown in the illustration below� Safety signs
are located in the same general area's across all the models covered in this manual� Good safety requires
that you familiarize yourself with the various safety signs, the type of warning and the area, or particular
function related to that area, that requires your SAFeTY AWAreNeSS�
C
A
A
B
reMeMBer - If safety signs have been damaged, removed, become illegible or parts replaced without
signs, new signs must be applied� New signs are available from your authorized dealer�
18
A
B
C
B
A
B
C
WARNING
Lock stabilizer in the DOWN position
before lifting frame into its vertical
position.
Transport
Release latch and raise frame into its
vertical position.
Lower frame into its horizontal position,
lock frame latch, raise stabilizer UP and
secure by tightening handle lock before
Operation
moving or transporting Splitter.
Z94139
Z94040
Z94140
Z94045
Z94145