Lldp Configuration; Lldp - HP nj2000 User Manual

LLDP Configuration

This page allows you to setup the
The LLDP State table contains a row for each port and two columns. The two columns are:
Port - The front-panel port number.
State - You can choose to disable or enable LLDP for each port. Enabling LLDP will allow the port to
receive and transmit TLVs.
There are three main buttons associated with this page:
HELP - Displays this window.
APPLY - Updates the switch configuration. No changes are made to the configuration until this button is
pressed.
REFRESH - Reloads the current page with the latest configuration settings.

LLDP

Link Layer Discovery Protocol (LLDP) allows devices on the network to share information about themselves for the
reasons of simplified troubleshooting, enhanced network management, and maintaining an accurate network
topology. LLDP-capable devices periodically transmit information in messages called Type Length Value (TLV)
fields to neighbor devices. This information includes port description, system name, system description, system
capabilities, and management address.
Copyright © 2009 3Com Corporation. All Rights Reserved.
3Com Network Jack NJ2000
LLDP configuration.
Page 34 of 44