Port to Mirror to
Select the destination port from the Port to Mirror to drop-down list. Any port can be selected. The tick-box of the
selected port will be cleared and disabled (see the Ports to Mirror section).
Note: Broadcast and Multicast packets are not mirrored since they are flooded to all ports anyway.
Ports to Mirror
There are two columns in this table. One is titled Port and one is titled Mirroring Enabled.
Port - The front-panel port number.
Mirroring Enabled - This field is associated with the port-number that is displayed immediately on its
left. Click on the tick-box to enable/disable Port Mirroring for the port.
Note: It will not be possible to select Mirroring Enabled for the destination port (the Port to Mirror to).
Copyright © 2009 3Com Corporation. All Rights Reserved.
3Com Network Jack NJ2000
Page 18 of 44