Rstp Status - HP nj2000 User Manual

RSTP status

This page shows RSTP bridge and port states. There are two tables on this page:
RSTP Bridge Overview
RSTP Port Status
There are two main buttons associated with this page:
HELP - Displays this window.
REFRESH - Refreshes the page with the current status.
RSTP Bridge Overview
The RSTP Bridge Overview table has one row to display settings for the whole switch.
Hello Time, Maximum Age and Forward Delay are displayed. Topology shows the switch
current state. Root ID indicates the root port ID for the switch.
RSTP Port Status
The table has one row for each port and seven columns. The columns are:
Port/Trunk - Port/Trunk ID number.
Path Cost - Show the path cost on this port.
Edge Port - Yes if the port is an edge port which connects to an end station.
P2p Port - Yes if the port link is connected to another STP device.
Protocol - Show the running protocol, RSTP or STP.
Port Role - Show the current port role
Copyright © 2009 3Com Corporation. All Rights Reserved.
3Com Network Jack NJ2000
- Show the RSTP settings for the whole switch.
- Detailed RSTP information for each port.
Page 38 of 44