Function Button - Pro-Form R500 User Manual

FUNCTION BUTTON

MODE
SET
RESET
TOTAL RESET
FUNCTIONS
SCAN
TIME COUNT UP
COUNT DOWN
(COUNT)
(TOTAL COUNT)
CALORIES
NOTE :
Without any signal transmitted to the monitor for 4 minutes, the LCD will shut off automaticly and all function da-
tas would be kept. The prevuious datas would display on the monitor when you come back training on the equip-
ment or directly display by pressing any button.
The monitor starts beeping to remind you as soon as any preset target datas is achieved to zero.
Battery specification : 1.5 V AA (2pcs)
1. To select each function for presetting.
2. to enter and switch to the next function after presetting.
To make upward adjustment of each function datas of time, count and calories.
To reset each single function of count, Time and calories
To Clear all preset datas and restart the computer.
Automatically scans throught each function in every 6 seconds.
The monitor will count workout time from 00:00 up to 99:59.
If you have preset target time, the monitor will count down to 00:00 when you start training.
COUNT UP: Accumulates workout numbers from zero.
COUNT DOWN: If you have preset target count numbers, the monitor will count from
preset down to zero when you start training.
The monitor will accumulate total workout numbers of different training durantion after the
monitor is intalled with batteries. This data could be reset to zero only when you replace batteries.
COUNT UP: Accumulates calories consumption during training.
COUNT DOWN: If you have preset target calories, the computer will count from preset
calories down to zero. This data is a rough guide only and should not be used as com-
parison over several exercice sessions.
6