Levelling The Undercounter Larder; Cleaning Before Use - Matsui MUF988W Instruction Manual

6. Check that the door is aligned
horizontally and vertically and that the
seals are closed on all sides before finally
tightening the bottom hinge. Re-adjust
the levelling feet.
GB
Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal Spanner
1. Remove the screws at the rear of top cover
Remove the packaging support form the base of the appliance and
replace with the 2 leveling feet. Make sure the appliance is level.
Use the leveling feet at the front. If the appliance is not level, the
doors and magnetic seal alignments will be affected.

Cleaning Before Use

Wipe the inside of the Freezer with a weak solution of bicarbonate soda. Then rinse with warm water using
a 'wrung-out' sponge or cloth. Wash the shelf in warm soapy water and dry completely before replacing in
the fridge. Clean the exterior of the fridge with a damp cloth.
If you require more information refer to the CLEANING section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
fridge.
• Before Switching On!
Do not switch on until two hours after moving the Freezer.
The coolant fluid needs time to settle.
6 6
MUF988W_WE_WEA_S_SE_IB_5L_final110512_door change.indb 6

Levelling the Undercounter Larder

12/05/2011 7:00 PM