Pro-face FP2600-T11 User Manual page 42

Touch Panel Commands
4-4
The following are touch panel commands sent from the host computer to the FP
unit.
Display ON
Display OFF
Display OFF
Click sound (high) ON
Click sound (high) OFF 6Ah ( j )
Click sound (low) ON
Click sound (low) OFF
FP2600-T11 User Manual
Touch Panel Commands
The letter inside the bracket next to the command code shows
the actual character used for that code.
65h ( e ) / 67h ( g )
65h ( e ) / 67h ( g )
Turns on FP2600-T11's display. Backlight is also turned on simultaneously.
66h ( f ) / 68h ( h )
66h ( f ) / 68h ( h )
Turns off FP2600-T11's display. Backlight is also turned off simultaneously.
• When the display is turned off by using this command, it is
necessary to write the Display ON command to turn it on again.
• Unlike when making the display turn off by automatic backlight
OFF mode, the display will not reappear by touching the panel.
Further, the Automatic Backlight OFF mode is set up by the Dip
Swtch 1-5 and the mode will be decided by the Dip Switch
setup condition when the power source of the FP unit is turned
on.
69h ( i )
69h ( i )
Makes a high click sound when the touch panel is touched.
6Ah ( j )
The high click sound is disabled.
6Bh ( k )
6Bh ( k )
Makes a low click sound when the touch panel is touched.
6Ch ( l )
6Ch ( l )
The low click sound is disabled.
RS232C
USB
RS232C
USB
RS232C
USB
RS232C
USB
RS232C
USB
RS232C
USB
4-5