Step 2: Setting The Time - Sony CMT-F3MD Operating Instructions Manual

3
Connect the mains lead to the mains.
If the plug of the mains lead does not fit your
wall outlet, attach the supplied adaptor on to
the plug (for models with a plug adaptor).
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes
• If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
• Be sure to insert the batteries in correct direction.
• Do not mix a new battery with an old one.
• Do not use different types of batteries together.
• Do not use a battery that is leaking.
• If the battery leaks, clean the battery compartment
and replace all the batteries with new ones.

Step 2: Setting the time

You must set the time beforehand to use the timer
functions.
3,5
CURSORT
DISP
1
Turn on the system.
2
Press CLOCK/TIMER SET.
The clock appears and the hour indication
flashes.
3
Press . or > to set the hour.
4
Press ENTER/YES or CURSORt.
The minute indication flashes.
1
2
3,5
4
4,6
continued
5