Table of Contents
Advertisement
St e p 3: Se t t ing t he
t im e
You must set the time before using the timer
functions.
The clock uses a 24-hour system on the
European model, and a 12-hour system on
other models.
The 12-hour system is used for illustration
purposes.
1
Press CLOCK/TIMER SET.
The hour indication flashes.
Downloaded from:
2,4
3,5
1
https://www.usersmanualguide.com/
2
Press . or > repeatedly to set
the hour.
3
Press ENTER.
The minute indication flashes.
4
Press . or > repeatedly to set
the minute.
5
Press ENTER.
The clock starts working.
Tip
If you make a mistake, start over from step 1.
To change t he t im e
The previous explanation shows how to set
the time while the power is off. To change the
time while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press . or > repeatedly to select SET
CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Not es
• The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
• For MHC-BX6AV, you cannot set the time in the
Power Saving Mode (see page 12).
9
Advertisement
Table of Contents
