Playing An Md - Sony CMT-F3MD Operating Instructions Manual

Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the mains lead
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure a complete recording.
If the MD becomes full during
recording
The CD player and the MD deck stop
automatically.
Note
If the MD is record protected, "C11" and "Protected"
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 24).

Playing an MD

To turn on the system, press ?/1 (power). You
can play an MD just like a CD.
?/1
(power)
MD indicator MD A
MD/CD lm/ML
1
Insert an MD.
With the arrow
pointing toward
the deck
With the label
side up, and the
shutter on the
righthand side
2
Press MD HS.
Play starts.
The MD HS indicator lights green.
Track number
2
MD s
VOLUME
Playing time
continued
11