Table of Contents
Advertisement
3
Press MENU/NO to display
"Edit Menu".
4
Press . or > repeatedly until
"A-B Erase ?" appears, then press
ENTER/YES.
5
Press ENTER/YES again.
"—Rehearsal—" and "Point A ok?" appear
alternately while the deck plays the selected
track from the beginning to point A.
6
While monitoring the sound, press .
or > repeatedly to find the starting
point of the portion to be erased (point
A).
You can shift the starting point by 1/86
second (1 frame) intervals.
To shift the point by second or minute
intervals, press m or M so that "s" or
"m" flashes, then press . or >.
7
Repeat step 6 until point A is played
correctly.
8
Press ENTER/YES if point A is correct.
"Point B Set" appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
9
Continue playback until the deck
reaches point B, then press ENTER/
YES.
"A-B Ers" and "Point B ok?" appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
10
Press . or > repeatedly to find
point B.
The procedure is the same as step 6.
11
Press ENTER/YES if point B is correct.
"Complete !!" appears for a few seconds and
the portion between point A and B is erased.
To cancel A-B Erase
Press MENU/NO.
To return to the condition before
A-B Erase
You can return to the original condition
immediately after erasing the track by using the
Undo function (see page 43).
Note
If "Impossible" appears, the specified portion cannot
be erased. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
39
Advertisement
Table of Contents
