Sony CMT-F3MD Operating Instructions Manual page 31

Turning on Smart Space
function
1
3,4,5
2,6
1
Press MD to switch the function to MD.
2
Press MENU/NO in stop mode.
3
Press . or > repeatedly until
"Setup ?" appears, then press ENTER/
YES.
4
Press . or > repeatedly until
"S.Space Off" (or "S.Space On")
appears, then press ENTER/YES.
5
Press . or > repeatedly until
"S.Space On" appears, then press
ENTER/YES.
6
Press MENU/NO.
To continue and record, follow the
procedures described on the various
recording pages.
If there is an extended silence of less than 30
seconds during recording, "Smart Space"
appears, and the MD deck replaces the
silence with a blank of about 3 seconds and
continues recording.
If there is no sound input for 30 seconds or
more during recording, "Auto Cut" appears,
3,4,5
and the MD deck replaces the silence with a
blank of about 3 seconds and switches to
recording pause. Press N to restart the
3,4,5
recording.
To turn off Smart Space and
Auto Cut functions
Press . or > repeatedly until "S.Space Off"
appears in step 5, then press ENTER/YES.
Tip
The Smart Space and Auto Cut functions are factory
set to on. If you turn off the system or disconnect the
mains lead, the MD deck will retain the last setting
(S.Space On or Off).
31