Recording On An Md Manually; Manual Recording - Sony CMT-F3MD Operating Instructions Manual

Recording your favourite CD
tracks on an MD (continued)
To stop recording
Press MD s or CD s.
If the MD becomes full during
recording
The MD deck and the CD player stop
automatically.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press ?/1 to
turn off the system. Do not pull out the mains lead
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure a complete recording.
Tip
The track numbers of the CD are recorded on to the
MD automatically.
Note
If the MD is record protected, "C11" and "Protected"
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 24).
Labelling titles during recording
If "CD-TEXT" lights up or flashes during
recording, you can record the CD TEXT
information on to the MD as follows:
• Automatically during recording
If you record on an unrecorded or completely
erased (see page 38) MD when "CD-TEXT" is
lit, the CD TEXT information is automatically
recorded.
• Manually during recording
When "CD-TEXT" flashes, press
CHARACTER on the remote, and then press
ENTER/YES on the remote to record the title
of the current track.
Note
Depending on the disc, the CD TEXT information
may not be recorded automatically.
26
Recording on an MD
manually

— Manual Recording

If you use a partially recorded MD, recording
starts after the recorded tracks.
1
Insert a recordable MD.
If the MD indicator is lit green, another MD
is already inserted. Press MD A and remove
the MD.
2
Press FUNCTION repeatedly to select
the desired source (e. g., TUNER) to
record.
• CD: Recording from the CD
• TUNER: Recording from the radio
• TAPE: Recording from the connected
component
3
Press z REC.
The MD deck stands by for recording.
4
Press MD HS.
Recording starts.
4
MD A
3 2